Welcome to the official website of Shenzhen Ledfocus Precision Manufacturing Co., Ltd.!
Hot products

Service Hotline

0755-29727486 0755-83734215 0755-83734236

Where are you now:Home >> News >> FAQ
How are cavities produced in SMT chip processing?
Time:2021-10-08 Read: 1433

For SMT chip processing, solder joint voids are a serious quality problem. The presence of voids will increase the oxidation of the product, leading to the deepening of the aging reaction of the product in advance. So, how do the hollows in SMT chip processing occur? Let the Shenzhen PCB manufacturer explain it for you in detail below:

1. The cause of solder paste. The alloy composition of the solder paste is different, and the size of the particles is different, which will cause bubbles during the solder paste printing process, and some air will continue to remain during reflow soldering, and voids will be generated after the bubbles burst at high temperatures.

2. Surface treatment of PCB pads. The surface treatment of the pad also has a crucial effect on the generation of voids.

3. Reflux curve setting. If the reflow soldering temperature rises too slowly or cools down too fast, the residual air inside cannot be effectively eliminated, resulting in voids.

4. Backflow environment. Whether the equipment is vacuum reflow soldering also affects the generation of voids.

5. Pad design. The unreasonable pad design is also a very important reason for voids.

6. Micropores. This is a point that is easily overlooked. If the micro-holes are not reserved or the positions of the micro-holes are not correct, voids may occur.

Contact Us
Shenzhen Ledfocus Precision Manufacturing Co., Ltd.

Address: Room 1204, Dahong (Xinqiao) Science and Technology Innovation Park, No. 48, Xinyu Road, Shajing Street, Baoan District, Shenzhen

Phone: 0755-29727486 0755-83734215 0755-83734236

Person in charge: Mr. Fan 13088821718

Email: roman@leikashi.com

Business section #605

Email: allen@leikashi.com

Website: www.leikashi.com

Service hotline
© 2020 Shenzhen Ledfocus Precision Manufacturing Co., Ltd. All rights reserved 粤ICP备2021139374号
  • Links: