Welcome to the official website of Shenzhen Ledfocus Precision Manufacturing Co., Ltd.!
News
News
Hot products

Service Hotline

0755-29727486 0755-83734215 0755-83734236
Company news

Where are you now:Home >> News >> Company news
Quality inspection during PCBA processing
Time:2021-11-17 Read: 347

In each step of PCBA processing, it is necessary to strictly follow the processing request and stop the meticulous quality inspection to ensure that no products with processing defects and quality risks enter the next processing link.


Today, the PCBA processing factory will give you a brief introduction to the quality inspection in the PCBA processing process.


The quality inspection content of PCBA processing includes incoming material inspection, process inspection and appearance assembly board inspection. The quality problems found in the process inspection can be corrected based on the rework status. The rework cost of unqualified products found in the incoming inspection of PCBA foundry materials, solder paste printing and pre-welding inspection is relatively low, and the impact on the reliability of electronic products is relatively small. However, the rework of unqualified products after welding is completely different.

PCBA加工

PCBA processing welding inspection is to stop all inspections for welding products. The general requirements are as follows: check whether the spot welding is bright, whether there are holes, holes, etc.; check whether the spot welding is crescent-shaped, whether there is more tin and less tin, whether there is a tombstone, Defects such as bridging, moving parts, missing parts, tin beads, etc. And whether all components have different levels of defects; check whether there are short-circuit, guide and other defects in the welding, and check the color change of the printed circuit board.

Contact Us
Shenzhen Ledfocus Precision Manufacturing Co., Ltd.

Address: Room 1204, Dahong (Xinqiao) Science and Technology Innovation Park, No. 48, Xinyu Road, Shajing Street, Baoan District, Shenzhen

Phone: 0755-29727486 0755-83734215 0755-83734236

Person in charge: Mr. Fan 13088821718

Email: roman@leikashi.com

Business section #605

Email: allen@leikashi.com

Website: www.leikashi.com

Service hotline
0755-83734236
© 2020 Shenzhen Ledfocus Precision Manufacturing Co., Ltd. All rights reserved 粤ICP备2021139374号-1