Welcome to the official website of Shenzhen Ledfocus Precision Manufacturing Co., Ltd.!
Products
Products
Hot products

Service Hotline

0755-29727486 0755-83734215 0755-83734236
PCBA plate making

Where are you now:Home >> Products >> PCBA plate making
Electronic sphygmomanometer motherboard
  • Electronic sphygmomanometer motherboard
  • Electronic sphygmomanometer motherboard
Electronic sphygmomanometer motherboard
Service hotline:
0755-29727486
0755-83734215
0755-83734236
Product details

PCBA testing refers to the electrical continuity of the PCBA circuit board mounted with electronic components and the detection based on input and output values. In the design of PCB circuit boards, there are numerical relationships between different test points, such as voltage and current. It is necessary to use professional test equipment or manual operation of a multimeter to test the test points to verify whether the actual PCBA board meets the design requirements. PCBA testing is a key step to ensure the quality of production and delivery. FCT test fixtures are made according to the test points, procedures, and test steps designed by the customer, and then the PCBA board is placed on the FCT test rack to complete the test.


PCBA test principle

Connect the test points on the PCBA board through the FCT test frame to form a complete path, connect the computer and the burner, and upload the MCU program. The MCU program will capture the user's input actions (such as long pressing the switch for 3 seconds), and control the on and off of the side circuit (such as LED flashing) or drive the motor to rotate through calculations. By observing the voltage and current values between the test points on the FCT test frame, and verifying whether these input and output actions are consistent with the design, the test of the entire PCBA board is completed.


PCBA test frame

Testing of large quantities of PCBA boards must be carried out, and corresponding test racks are generally opened to assist in efficient completion. The principle of the test rack is to connect the test thimble to the test point of the PCB board. When the power is turned on, the key data such as voltage and current in the circuit are obtained and displayed on the display screen of the test rack to achieve the purpose of rapid detection. When the customer designs the PCB board, the engineer will consider its test plan, will reserve PCB test points, and issue a professional test document or test plan to the manufacturer.

Contact Us
Shenzhen Ledfocus Precision Manufacturing Co., Ltd.

Address: Room 1204, Dahong (Xinqiao) Science and Technology Innovation Park, No. 48, Xinyu Road, Shajing Street, Baoan District, Shenzhen

Phone: 0755-29727486 0755-83734215 0755-83734236

Person in charge: Mr. Fan 13088821718

Email: roman@leikashi.com

Business section #605

Email: allen@leikashi.com

Website: www.leikashi.com

Service hotline
0755-83734236
© 2020 Shenzhen Ledfocus Precision Manufacturing Co., Ltd. All rights reserved 粤ICP备2021139374号
  • Links: