Welcome to the official website of Shenzhen Ledfocus Precision Manufacturing Co., Ltd.!
News
News
Hot products

Service Hotline

0755-29727486 0755-83734215 0755-83734236
FAQ

Where are you now:Home >> News >> FAQ
How to solve the throwing problem of SMT Mounter caused by program problem?
Time:2021-10-08 Read: 196

First check whether the material size setting of the program is correct, the height of the suction nozzle, whether the suction nozzle is worn or not, and whether the vacuum percentage is normal. Then check whether the feeder coordinates are shifted during the production transition (requires regular colleges and universities). Finally, check whether the compressed air is normal (clean the solenoid valve, replace the air pipe, recalibrate the air pressure).


After all the above checks are correct, you need to correct the laser height of the placement head, the rotation center of the suction nozzle and the deviation of the plate placement head (fixtures are required, please do not operate at will, inexperience may cause the equipment and the program to be messed up, and the right may also hit Bad patch header).

Contact Us
Shenzhen Ledfocus Precision Manufacturing Co., Ltd.

Address: Room 1204, Dahong (Xinqiao) Science and Technology Innovation Park, No. 48, Xinyu Road, Shajing Street, Baoan District, Shenzhen

Phone: 0755-29727486 0755-83734215 0755-83734236

Person in charge: Mr. Fan 13088821718

Email: roman@leikashi.com

Business section #605

Mr. Li 15813882765

Email: allen@leikashi.com

Website: www.leikashi.com

Service hotline
0755-83734236
© 2020 Shenzhen Ledfocus Precision Manufacturing Co., Ltd. All rights reserved 粤ICP备2021139374号-1